输入过硫酸铵运行simulation即出错
遇到一个很奇怪的问题。在组分中添加（NH4）2S2O8过硫酸铵，运行properties没有错误，但是出现simulation即出现错误。
注：
1，我仅在组分中添加了过硫酸铵的成分，并没有在任何流股添加任何过硫酸铵的数值。
2，错误大多出现在mixer or 流股中。
eg.
**ERROR WHILE GENERATING REPORT FOR STREAM: "MIX-03-1"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "MIX-03-2"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "MIX03OUT"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "MIX-03-1"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "MIX-03-2"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "MIX03OUT"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "R01AIN-G"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "R01AIN-G"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "R01BIN-G"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
**ERROR WHILE GENERATING REPORT FOR STREAM: "R01BIN-G"
FLASH CALCULATIONS BYPASSED DUE TO UNREASONABLE SPECIFICATIONS. SPECIFIED
TEMPERATURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (1.0000D+04).
SPECIFIED PRESSURE (MISSING) IS HIGHER THAN THE UPPER LIMIT (
1.0000D+10 ). PROPERTIES WILL NOT BE CALCULATED DUE TO FLASH FAILURE.
有木有大佬见过这种奇怪的问题啊！！求解！
亲身经历，真人真事，有木有老铁帮帮忙哒！ 我在此提出一个想法。看有木有前辈知道的？
因为我的全局是ELECNRTL,所以要将过硫酸铵改为有离子形式的。比如在ELEC WIZARD中定义可能的反应式的。
提问：如果流程已经通了，再在组分添加离子化合物，好像一定会出现错误？这个bug有木有老铁懂些~如何保证输入组分也不会出现错误的~
是不是应该得从来再搭一遍流程的？（因为我的流程过于复杂，再搭一遍我没有信心和时间可以搭出来的）
感谢各位老铁了~
你好，我现在在aspen模拟的时候需要输入过硫酸铵这个物质，可以请教一下你是怎么输入的吗 本帖最后由 ?!. 于 2019-3-23 10:49 编辑
造造了 发表于 2019-3-22 20:57
你好，我现在在aspen模拟的时候需要输入过硫酸铵这个物质，可以请教一下你是怎么输入的吗
先随便给一个component ID，然后点击Find，在contains里面输入过硫酸铵的分子式，选择过硫酸铵，然后and slect compount!!!!过硫酸铵可能是电解质，会用到Elec Wizard对电解质中的离子进行选择和电离反应进行定义。
页:
[1]