马友们，这个设计规范怎么加呀，一直错误，可以帮帮我吗
我想通过调节流股11的温度使换热器HX1和HX2热负荷绝对值相等，别的流程没问题，但是设计规范收敛不了The following Convergence blocks were
completed with errors:
$OLVER03
The following messages were issued during Input Translation:
*WARNING WHILE CHECKING INPUT SPECIFICATIONS FOR VARIED VARIABLE IN
DESIGN-SPEC: 'DS-1'
YOU ARE VARYING A VARIABLE OF AN INTERMEDIATE STREAM
STREAM RESULTS MAY BE INCONSISTENT WITH THE BLOCK UPSTREAM
*WARNING WHILE CHECKING INPUT SPECIFICATIONS
INCONSISTENT FREE WATER SETTING DETECTED FOR 2 STREAMS
SOURCE BLOCK FREE WATER STREAM DESTINATION BLOCK FREE WATER
=================== ========== ======== =================== ==========
B8 YES 31 ABSORBER NO
B7 NO 18 B8 YES
上下限，起始点，关注一下。另外是否是否独立变量或者有其他关联。 设计规定用HX2的进口温度做变量，但你的流程好像控制不了HX2进料的温度，试试在HX2前面加个加热器，变量改成加热器负荷或者出口温度
页:
[1]