| A627-03 | 安全设备用均质不易加工的钢棒 | Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities |
| A630-03 | 热浸电解镀锡板镀锡层重量测定的方法 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate |
| A632-04 | 通用无缝和焊接奥氏体不锈钢管(小直径) | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
| A633/A633M-01 | 正火的高强度低合金结构钢 | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
| A635/A635M-04e1 | 热轧碳素钢薄板,带材和重型粗盘条规格 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
| A636-76(2000) | 氧化镍烧结块 | Standard Specification for Nickel Oxide Sinter |
| A638/A638M-00 | 高温用沉积硬化铁基超级合金棒,锻件及锻坯料 | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service |
| A640-97(2002)e1 | 8字型缆吊架用镀锌钢丝绳 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable |
| A641/A641M-03 | 镀锌（电镀）碳素钢丝技术规范 | Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
| A644-98(2003) | 铁铸件的相关术语 | Standard Terminology Relating to Iron Castings |
| A645/A645M-99a | 压力容器用经特殊热处理的5%镍合金钢板 | Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated |
| A646-95(1999) | 飞机及航空器锻件用优质合金钢大方坯及坯段 | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings |
| A648-04 | 预应力混凝土管用冷拉钢丝 | Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe |
| A649/A649M-99(2003) | 波纹纸机械用锻制钢辊规格 | Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery |
| A650/A650M-03 | 二次压延的锡轧黑板材 | Standard Specification for Tin Mill Products, Black Plate, Double Reduced |
| A653/A653M-04a | 热浸处理的镀锌铁合金或镀锌合金薄钢板的标准规范 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| A656/A656M-03 | 具有改良可模锻性的高强度低合金热轧结构钢板 | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability |
| A657/A657M-03 | 一次和二次压延电解镀铬黑钢板轧制品技术规范 | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced |
| A659/A659M-97(2001) | 商业级热轧碳素钢薄板和带材(最大含碳量为0.16%-0.25%) | Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled |
| A660-96(2001) | 高温用离心铸造碳素钢管 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| A662/A662M-03 | 中温和低温压力容器用锰碳钢板规格 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| A663/A663M-89(2000) | 商品级碳素钢棒的机械特性 | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
| A664-99 | 在ASTM规范中对电工钢和层压钢级别的识别 | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications |
| A666-03 | 退火或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁棒 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| A667/A667M-87(2003) | 离心铸造的双金属(灰口及白口铸铁)圆柱体 | Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders |
| A668/A668M-04 | 一般工业用碳素钢和合金钢锻件 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| A671-04 | 常温和较低温用电熔焊钢管 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| A672-96(2001) | 中温高压用电熔焊钢管 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
| A673/A673M-04 | 结构钢冲击试验的取样程序 | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel |
| A674-00 | 水或其它液体用球墨铸铁管的聚乙烯包装 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
| A675/A675M-03 | 专用热轧碳素钢棒的机械特性 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
| A677/A677M-99 | 全处理型无取向电工钢 | Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
| A678/A678M-00a | 结构用经回火和淬火的高强度低合金碳素钢板规格 | Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates |
| A679/A679M-00 | 硬(冷)拉高抗拉强度钢丝 | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
| A681-94(1999) | 合金工具钢 | Standard Specification for Tool Steels Alloy |
| A682/A682M-02 | 弹簧用冷轧高碳钢带材 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For |
| A683/A683M-99 | 半处理型无取向电工钢 | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
| A684/A684M-86(2002) | 冷轧高碳钢带材 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| A686-92(1999) | 碳素工具钢 | Standard Specification for Tool Steel, Carbon |
| A688/A688M-03 | 焊接的奥氏体不锈钢给水加热器管 | Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| A689-97(2002) | 弹簧用碳素钢及合金钢棒 | Standard Specification for Carbon and Alloy Steel Bars for Springs |
| A690/A690M-00a | 在海洋环境中使用的高强度低合金工字形钢桩和薄板桩规格 | Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments |
| A691-98(2002) | 高温下高压装置用电熔焊碳素钢和合金钢管 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| A693-03 | 沉淀硬化耐热不锈钢板、薄板和带材 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A694/A694M-03 | 高压传输设备用碳素钢及合金钢管法兰、配件、阀门及零件用锻件 | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
| A696-90a(2000) | 压力管道部件专用热锻或冷精轧碳素钢棒 | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
| A697/A697M-03 | 用伏特计、安培计和瓦特计法测定迭层铁芯样品的交流磁特性的试验方法 | Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods |
| A698/A698M-02 | 在弱交流磁场中磁屏蔽效率的试验方法 | Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields |
| A700-99e1 | 钢制品国内装运的包装、标记和装载方法 | Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment |
| A701-96(2000) | 硅锰铁 | Standard Specification for Ferromanganese-Silicon |
| A702-89(2000) | 热锻钢栅栏柱和组件 | Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought |
| A703/A703M-04a | 受压部件用钢铸件 | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
| A704/A704M-01 | 混凝土加筋用焊接普通钢棒或杆的光面钢筋或钢筋网 | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
| A705/A705M-95(2000) | 时效硬化的不锈和耐热钢锻件 | Standard Specification for Age-Hardening Stainless Steel Forgings |
| A706/A706M-04a | 混凝土配筋用变形低合金光面无节钢筋 | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
| A707/A707M-02 | 低温设备用锻制碳素钢和合金钢法兰 | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
| A709/A709M-04 | 桥梁用结构钢 | Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges |
| A710/A710M-02 | 低碳时效硬化的镍铜铬钼铌合金钢 | Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
| A711-04 | 钢锻件坯料 | Standard Specification for Steel Forging Stock |
| A712-97(2002) | 软磁性合金电阻率的测试方法 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys |
| A713-04 | 热处理部件用高碳弹簧钢丝 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| A714-99(2003) | 高强度低合金焊接钢管和无缝钢管 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| A716-03 | 球墨铸铁涵洞管 | Standard Specification for Ductile Iron Culvert Pipe |
| A717/A717M-01 | 单片样品表面绝缘电阻率的试验方法 | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
| A719/A719M-02 | 磁性材料的叠装系数的试验方法 | Standard Test Method for Lamination Factor of Magnetic Materials |
| A720/A720M-02 | 无取向电工钢延展性的试验方法 | Standard Test Method for Ductility of Nonoriented Electrical Steel |
| A721/A721M-02 | 取向的电工钢的延展性试验方法 | Standard Test Method for Ductility of Oriented Electrical Steel |
| A722/A722M-98(2003) | 预应力混凝土用无涂覆的高强度钢筋 | Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete |
| A723/A723M-02 | 高强度压力元件用合金钢锻件 | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
| A724/A724M-04 | 叠层焊接的压力容器用经淬火及回火的碳素钢压力容器板 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
| A726-00 | 半成品型冷轧磁性迭片级钢 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types |
| A727/A727M-02 | 具有固定切口韧性的管道部件用碳素钢锻件 | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
| A729-93(1999) | 货物运输及电气铁路用热处理合金钢轴 | Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service |
| A730-93(1999) | 铁路用碳素钢及合金钢锻件 | Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use |
| A732/A732M-02 | 一般设备用熔模铸造碳素低合金钢及高强度加温钴合金钢铸件 | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
| A733-03 | 焊接及无缝碳素钢和奥氏体不锈钢管接头 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
| A734/A734M-87a(2003) | 经淬火和回火的合金钢与高强度低合金钢压力容器板 | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered |
| A735/A735M-03 | 中温和低温用低碳锰钼钶合金钢压力容器板 | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
| A736/A736M-03 | 低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢压力容器板 | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
| A737/A737M-99 | 高强度低合金钢压力容器板 | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
| A738/A738M-03a | 中温和低温设备用经热处理的碳锰硅钢压力容器板 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| A739-90a(2000) | 升温或/和加压部件用热轧合金钢棒 | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
| A740-98(2003) | 钢丝网(编织或焊接电镀钢丝网) | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| A741-98(2003) | 公路护栏用镀锌钢丝绳和配件 | Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail |
| A742/A742M-03 | 波纹钢管用预涂聚合物和金属涂覆钢薄板 | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
| A743/A743M-03 | 一般用耐腐蚀铬铁及镍铬铁合金铸件 | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
| A744/A744M-00e1 | 严酷条件下使用的耐腐蚀镍铬铁合金铸件 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| A745/A745M-94(2003) | 奥氏体钢锻件的超声波检验 | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
| A746-03 | 排污管用球墨铸铁 | Standard Specification for Ductile Iron Gravity Sewer Pipe |
| A747/A747M-99 | 沉淀硬化不锈钢铸件 | Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
| A748/A748M-87(2003) | 压力容器用静态铸造的激冷白口铁-灰口铁双金属轧辊 | Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use |
| A749/A749M-97(2002) | 热轧碳素钢和高强度低合金钢带材通用要求 | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| A751-01 | 钢制品化学分析的实验方法、操作和术语 | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
| A752-04 | 合金钢条和粗圆钢丝 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
| A752M-04 | 合金钢条和粗圆钢丝(米制) | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| A753-02 | 镍铁软磁合金 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
| A754/A754M-96(2000) | X射线荧光涂层厚度的试验方法 | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
| A755/A755M-03 | 外露建筑材料用热浸涂覆和用卷涂工艺预涂的钢薄板 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| A756-94(2001) | 耐磨不锈轴承钢 | Standard Specification for Stainless Anti-Friction Bearing Steel |
| A757/A757M-00 | 低温下承压设备及其它设备用铁素体和马氏体钢铸件 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
| A758/A758M-00 | 具有改进的切口韧性的对缝焊锻制碳素钢管配件 | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
| A759-00 | 起重机用碳钢轨条 | Standard Specification for Carbon Steel Crane Rails |
| A760/A760M-01a | 下水道和排水沟用金属涂覆的波纹钢管 | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
| A761/A761M-04 | 现场栓接管、管拱和拱用波纹镀锌结构钢板 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
| A762/A762M-00 | 下水道和排水沟用预涂聚合物波纹钢管 | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
| A763-93(2004) | 铁素体不锈钢晶间腐蚀敏感性检测 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
| A764-95(2001) | 机械弹簧用冷拉镀锌和按成品尺寸镀锌的碳素钢丝 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| A765/A765M-01 | 具有强制性韧性要求的碳素钢及低合金钢压力容器部件锻件 | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| A767/A767M-00b | 钢筋混凝土用镀锌钢筋 | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
| A768-95(2001) | 涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件 | Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| A769/A769M-00 | 电阻焊钢结构型材 | Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes |
| A770/A770M-03 | 专用钢板通过厚度测量进行的抗拉试验 | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
| A771/A771M-95(2001) | 增殖反应堆堆芯部件用奥氏体不锈钢管 | Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components |
| A772/A772M-00 | 正弦电流用材料的交流磁导率的试验方法 | Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current |
| A773/A773M-01 | 用带直流电子的磁滞曲线记录仪的（B－H）回路法测量材料的磁性能的标准试验方法 | Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs |
| A774/A774M-02 | 低温和中温一般腐蚀情况下用的焊接锻制奥氏体不锈钢配件 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
| A775/A775M-04a | 涂环氧树脂的钢筋钢棒 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
| A778-01 | 焊接未退火的奥氏体不锈钢管形制品 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| A779/A779M-00 | 预应力混凝土用应力消除未涂覆的密实七股钢丝绞绳 | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete |
| A780-01 | 热浸镀锌层的损坏及无覆层区域的检修 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| A781/A781M-04a | 一般工业用一般要求的钢和合金铸件 | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| A782/A782M-90(2001) | 经淬火和回火的锰铬钼硅锆合金钢压力容器板 | Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
| A786/A786M-00b | 轧制钢楼板 | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
| A787-01 | 电阻焊金属涂覆碳素钢机械配管 | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
| A788-04a | 钢锻件 | Standard Specification for Steel Forgings, General Requirements |
| A789/A789M-04a | 普通设备用无缝与焊接铁素体/奥氏体不锈钢管 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
| A790/A790M-04a | 无缝与焊接铁素体/奥氏体不锈钢管 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
| A792/A792M-03 | 热浸工艺法处理的55%铝-锌合金涂覆钢板 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| A793-96(2001) | 不锈钢轧制楼板 | Standard Specification for Rolled Floor Plate, Stainless Steel |
| A794-97(2002) | 商品级冷轧碳素钢薄板(最高含碳量为0.16%-0.25%) | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled |
| A795/A795M-04 | 防火用黑色及热浸镀锌的焊接和无缝钢管 | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
| A796/A796M-04 | 雨水管和卫生污水管及其它地下埋设管道用波纹钢管、管托架及拱形架结构设计惯例 | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
| A798/A798M-01 | 下水道及其它类似用途用工厂制波纹钢管的安装 | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
| A799/A799M-04 | 估算不锈钢铸件铁素体含量用仪表的校准 | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content |
| A800/A800M-01 | 奥氏体合金钢铸件中铁素体含量的估算 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof |
| A801/A801M-99 | 铁钴高磁性饱和合金 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650 |
| A802/A802M-95(2001) | 钢铸件外观检验的表面验收标准 | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
| A803/A803M-03 | 焊接铁素体不锈钢给水加热器管 | Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes |
| A804/A804M-04 | 在电力频率下用薄钢板型试样对材料交流磁特性的测试方法 | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
| A805-93(2002) | 冷轧碳素钢扁平线 | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
| A807/A807M-02e1 | 下水道及其它类似用途用波纹结构钢涂覆管的安装 | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
| A808/A808M-00a | 具有改进的切口韧性的结构级高强度低合金碳钢、锰钢、铌钢和钒钢 | Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness |
| A809-98 | 镀铝碳素钢丝 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| A810-01 | 镀锌钢管用绕网 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
| A811-03 | 粉末冶金技术制造的软磁铁零件 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques |
| A813/A813M-01 | 单或双焊接奥氏体不锈钢管 | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
| A814/A814M-03 | 冷加工焊接奥氏体不锈钢管 | Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A815/A815M-04 | 锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件 | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
| A817-03 | 链接栅栏网用金属涂覆钢丝 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
| A818-91(2001) | 镀铜碳素钢丝 | Standard Specification for Coppered Carbon Steel Wire |
| A820/A820M-04 | 纤维增强混凝土用钢纤维 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
| A821/A821M-99 | 预应力混凝土容器用经回火的冷拉钢丝 | Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks |
| A822-90(2003) | 液压系统设备用冷拉碳素无缝钢管 | Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service |
| A823-99(2003) | 静铸永久铸模灰铸件 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| A824-01 | 链接栅栏用Marcelled拉力金属涂覆钢丝 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
| A827/A827M-02 | 锻造及类似用途用的碳素钢板技术规范 | Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications |
| A829/A829M-04 | 结构性合金钢板 | Standard Specification for Alloy Structural Steel Plates |
| A830/A830M-02 | 按照化学成分要求提供的优质碳素钢板技术规范 | Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements |
| A831/A831M-95(2000) | 核心部件用不锈耐热钢棒,坯段及锻件规格 | Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components |
| A832/A832M-99e1 | 压力容器板用铬钼钒及铬钼钒钛硼合金钢 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
| A833-84(2001) | 用比较硬度测试仪测量金属材料的压痕硬性 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| A834-95(2001) | 一般工业用铁铸件的一般要求 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| A835-84(2000) | 铁合金与合金添加剂的筛分粒度 | Standard Specification for Sizes of Ferroalloys and Alloy Additives |
| A836/A836M-02 | 搪瓷管和压力容器设备用钛稳定碳素体钢锻件 | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service |
| A837/A837M-03 | 渗碳用合金钢锻件 | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications |
| A838-02 | 继电器用易切削铁素体不锈软磁合金技术规范 | Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications |
| A839-02 | 软磁用途的磷铁粉末冶金制造的零件技术规范 | Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications |
| A840/A840M-00 | 全处理的磁性夹层钢 | Standard Specification for Fully Processed Magnetic Lamination Steel |
| A841/A841M-03a | 压力容器用温度机械控制工艺加工的钢板 | Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) |
| A842-85(2004) | 高密度石墨铸铁 | Standard Specification for Compacted Graphite Iron Castings |
| A844/A844M-93(1999) | 压力容器用直接淬火加工的含镍9%的合金钢板 | Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process |
| A845-85(2000) | 用于脱氧与合金钢的钛碎片 | Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel |
| A846-85(2000) | 用于脱氧与合金钢的铝碎片 | Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel |
| A847-99a(2003) | 具有增强耐大气腐蚀性能的冷成型焊接与无缝高强度低合金结构管 | Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| A848-01 | 低碳磁铁 | Standard Specification for Low-Carbon Magnetic Iron |
| A849-00 | 波纹钢排水管和污水管用后涂覆铺面和衬里材料 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
| A852/A852M-03 | 最小屈服强度为70Ksi(485MPa),厚度为4英寸(100mm)的经淬火和回火的低合金结构钢板 | Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick |
| A853-04 | 普通碳素钢丝 | Standard Specification for Steel Wire, Carbon, for General Use |
| A854/A854M-98(2003) | 镀锌高强度钢栅栏和格架用光滑金属线 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| A855/A855M-03 | 锌-5%铝-铈合金涂覆的钢丝绳 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand |
| A856/A856M-03 | 锌-5%铝-铈合金涂覆的碳素钢丝 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| A857/A857M-00a | 冷成形轻型薄钢板桩 | Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage |
| A858/A858M-00 | 低温和腐蚀情况下用热处理碳素钢配件 | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service |
| A859/A859M-04 | 压力容器部件用时效硬化镍铜铬钼钶低碳合金钢锻件 | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
| A860/A860M-00 | 锻制高强度低合金钢的高强度对缝焊接配件 | Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings |
| A861-04 | 高硅铁管和配件 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| A862/A862M-98(2003) | 波纹钢污水管和排水管沥清(柏油)涂层的应用 | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe |
| A865-03 | 钢管连接用黑色或镀锌焊接或无缝钢螺纹接头 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| A866-01 | 耐磨中碳轴承钢 | Standard Specification for Medium Carbon Anti-Friction Bearing Steel |
| A867-03 | 继电器用铁硅钢 | Standard Specification for Iron-Silicon Relay Steels |
| A871/A871M-03 | 抗空气腐蚀的高强度低合金结构钢板 | Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance |
| A872/A872M-02 | 腐蚀环境下用离心铸造铁素体/奥氏体不锈钢管 | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
| A874/A874M-98 | 适于低温使用的铁素体球墨铸铁铸件 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| A875/A875M-02a | 热浸处理的锌-5%铝合金金属涂覆的钢薄板 | Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process |
| A876-03 | 全处理型平轧的晶粒取向的硅铁电工钢 | Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types |
| A877/A877M-99 | 铬硅合金阀弹簧级钢丝 | Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality |
| A878/A878M-99 | 经改良的铬钒阀弹簧级钢丝 | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality |
| A879-00 | 每面镀层质量应予标明的电解镀锌薄钢板 | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
| A881/A881M-02 | 预应力混凝土铁路轨枕用应力消除或应力松弛变形钢丝 | Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties |
| A882/A882M-04a | 涂环氧树脂的七股预应力钢丝绳 | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand |
发表于 2025-3-25 09:01:56
显示全部楼层
IP卡
狗仔卡
提升卡
置顶卡
喧嚣卡
变色卡
千斤顶
显身卡
楼主