vlle thermodynamic methods are not allowed by the io model的错误如何解决？
4 error(s), 0 warning(s), and 0 message(s) detected:*** error ***Unit 1, 'contactor' - a vlle thermodynamic method set is used in the column, but the calculated phases option is set to vle. To resolve, go to the main column. Either set the calculated phases option to vlle, or remove the vlle thermodynamic method set from the column.
*** error ***Unit 1, 'contactor' - vlle thermodynamic methods are not allowed by the io model.
*** error ***Unit 2, 'regenerator' - a vlle thermodynamic method set is used in the column, but the calculated phases option is set to vle. To resolve, go to the main column. Either set the calculated phases option to vlle, or remove the vlle thermodynamic method set from the column.
*** error ***Unit 2, 'regenerator' - vlle thermodynamic methods are not allowed by the io model.
我没对塔设VLLE啊
计算相态都只有vapor-Liquid一种，一没法改啊
求教高人怎么进行修改
谢谢啦
9.2版prz文件及inp见附件
你的版本太高了，打不开啊~
蓝山居士 发表于 2013-11-9 20:17
你的版本太高了，打不开啊~
导入inp应该没问题吧 longkui老兄，文件我打不开，以下是我个人设想，仅供参考：你这个里面可能有个问题，可能出在你的热力学方法设置上，可能你设置的热力学方法是二元液相的计算方法，然后，计算时候，使用的是默认的热力学方法。 327845876 发表于 2013-11-12 11:20
longkui老兄，文件我打不开，以下是我个人设想，仅供参考：你这个里面可能有个问题，可能出在你的热力学方 ...
导入inp也不行么
刚试了下，换个热力学方法确实不会出现刚才这个问题了
但是更多的其它的error出来了。。。。
我再捣腾下，谢谢啦
页:
[1]