教育局长123 发表于 2015-4-1 16:51:15

求助吸收问题

*** SEVERE ERROR
      THE FOLLOWING STAGES DRIED UP (VAPOR OR LIQUID FLOW APPROACHES 0):
      1    2    3    4    5    6    7    8    9   10
      A LIMIT OF0.10000E-04 * SUM OF FEEDS WAS IMPOSED ON THE FLOW RATES
      OR A LIMIT OF0.10000E-04 WAS IMPOSED ON THE STAGE V/L OR L/V RATIO.


> Loop $OLVER01 Method: WEGSTEIN   Iteration   30
*   WARNING
      CONVERGENCE BLOCK $OLVER01 NOT CONVERGED IN 30 ITERATIONS

5 vars not converged, Max Err/Tol-0.24148E+03
**ERROR
      BLOCK RAD IS NOT IN MASS BALANCE:
      MASS INLET FLOW = 0.75192488E+01, MASS OUTLET FLOW = 0.74764531E+01
      RELATIVE DIFFERENCE = 0.57240546E-02
      MAY BE DUE TO A TEAR STREAM OR A STREAM FLOW MAY HAVE
      BEEN CHANGED BY A FORTRAN, TRANSFER, OR BALANCE BLOCK
      AFTER THE BLOCK HAD BEEN EXECUTED.

**ERROR
      Convergence block $OLVER01 did not converge
      normally in the final pass
这个怎么破

2013qustgm205 发表于 2015-4-1 16:51:15

从上往下说，显示严重错误，1到10干板，然后警告是模块30次迭代不收敛，然后错误是模块质量不守恒，最后一个错误是不收敛。

杞╃埜 发表于 2015-4-1 16:51:15

严重错误提示你塔干板了

杞╃埜 发表于 2015-4-1 16:51:15

上传bkp文件看看

伟少麽麽哒 发表于 2015-4-1 16:51:15

我也是这个问题
页: [1]
查看完整版本: 求助吸收问题