Aspen模拟中反应不满足质量平衡，怎么解决啊

lijuhang

错误提示：<< Loading Simulation Engine 18:28:47 Thu Jul 21, 2016>>


->Processing input specifications ...

  *   WARNING IN PHYSICAL PROPERTY SYSTEM
      MW MISSING FOR COMPONENT MN-1

  **  ERROR IN THE "REACTIONS" PARAGRAPH WHICH BEGINS ON LINE 413
      FIRST ID: R-1    SECOND ID: POWERLAW
      REACTION NUMBER     1 IN REACTION R-1      DOES NOT SATISFY MASS
      BALANCE. THE ABSOLUTE ERROR IS  0.10000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR IN THE "REACTIONS" PARAGRAPH WHICH BEGINS ON LINE 413
      FIRST ID: R-1    SECOND ID: POWERLAW
      REACTION NUMBER     2 IN REACTION R-1      DOES NOT SATISFY MASS
      BALANCE. THE ABSOLUTE ERROR IS  0.10000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      REACTION NUMBER "2" DOES NOT SATISFY MASS BALANCE.
      THE ABSOLUTE ERROR IS -0.20000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      REACTION NUMBER "3" DOES NOT SATISFY MASS BALANCE.
      THE ABSOLUTE ERROR IS -0.20000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          MN-1        DMO
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: REACTOR    MODEL NAME: RPLUG
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          MN-1
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: RPLUG2    MODEL NAME: RPLUG
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          DMO
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

! Errors while processing input specifications

<< Run Saved >>



->Processing input specifications ...

  *   WARNING IN PHYSICAL PROPERTY SYSTEM
      MW MISSING FOR COMPONENT MN-1

  **  ERROR IN THE "REACTIONS" PARAGRAPH WHICH BEGINS ON LINE 413
      FIRST ID: R-1    SECOND ID: POWERLAW
      REACTION NUMBER     1 IN REACTION R-1      DOES NOT SATISFY MASS
      BALANCE. THE ABSOLUTE ERROR IS  0.10000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR IN THE "REACTIONS" PARAGRAPH WHICH BEGINS ON LINE 413
      FIRST ID: R-1    SECOND ID: POWERLAW
      REACTION NUMBER     2 IN REACTION R-1      DOES NOT SATISFY MASS
      BALANCE. THE ABSOLUTE ERROR IS  0.10000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      REACTION NUMBER "2" DOES NOT SATISFY MASS BALANCE.
      THE ABSOLUTE ERROR IS -0.20000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      REACTION NUMBER "3" DOES NOT SATISFY MASS BALANCE.
      THE ABSOLUTE ERROR IS -0.20000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          MN-1        DMO
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: REACTOR    MODEL NAME: RPLUG
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          MN-1
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: RPLUG2    MODEL NAME: RPLUG
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          DMO
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

! Errors while processing input specifications


->Processing input specifications ...

  *   WARNING IN PHYSICAL PROPERTY SYSTEM
      MW MISSING FOR COMPONENT MN-1

  **  ERROR IN THE "REACTIONS" PARAGRAPH WHICH BEGINS ON LINE 413
      FIRST ID: R-1    SECOND ID: POWERLAW
      REACTION NUMBER     1 IN REACTION R-1      DOES NOT SATISFY MASS
      BALANCE. THE ABSOLUTE ERROR IS  0.10000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR IN THE "REACTIONS" PARAGRAPH WHICH BEGINS ON LINE 413
      FIRST ID: R-1    SECOND ID: POWERLAW
      REACTION NUMBER     2 IN REACTION R-1      DOES NOT SATISFY MASS
      BALANCE. THE ABSOLUTE ERROR IS  0.10000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      REACTION NUMBER "2" DOES NOT SATISFY MASS BALANCE.
      THE ABSOLUTE ERROR IS -0.20000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  **  ERROR WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      REACTION NUMBER "3" DOES NOT SATISFY MASS BALANCE.
      THE ABSOLUTE ERROR IS -0.20000E+36
      CHECK STOICHIOMETRY/MOLECULAR WEIGHTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: R0201    MODEL NAME: RSTOIC
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          MN-1        DMO
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: REACTOR    MODEL NAME: RPLUG
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          MN-1
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

  *   WARNING WHILE CHECKING INPUT SPECIFICATIONS
      BLOCK NAME: RPLUG2    MODEL NAME: RPLUG
      PHYSICAL PROPERTY PARAMETER DHFORM   OR DHAQFM   IS MISSING
      FOR THE FOLLOWING COMPONENTS:
          DMO
      ABSENCE OF THIS PARAMETER WILL RESULT IN INCORRECT ENTHALPY RESULTS.

! Errors while processing input specifications


<< Loading Simulation Engine 19:29:50 Thu Jul 21, 2016>>

lijuhang

{:1106_369:}没人

水为之

把反应器单独提出来模拟吧，可以微调一下参数，等反应器模拟通啦再加到整个流程中进行模拟