猛犸论坛【以梦为马,不负韶华】

搜索
查看: 1887|回复: 8
收起左侧

molten salt的电解模拟

[复制链接]
发表于 2020-12-16 16:33:30 显示全部楼层 |阅读模式
aspen求助
aspen版本: V11
请问怎样模拟Ca3(PO4)2在熔融CaCl2中电解的反应(没有水)
方程式:2Ca3(PO4)2 (in CaCl2)=P4(g)+5O2(g)+6CaO(in CaCl2)
Ca3(PO4)2(in CaCl2)+5C(s)=0.5P4(g)+5CO(g)+3CaO(in CaCl2) (C电极)
谢谢
发表于 2020-12-16 16:33:30 显示全部楼层
本帖最后由 banknation 于 2020-12-21 06:11 编辑

你在百度中搜索一下英文资料,有Aspen Plus模拟固体氧化物电池文献,可做为参考。
例如:
Doherty, W., A. Reynolds, et al. (2010). "Computer simulation of a biomass gasification-solid oxide fuel cell power system using Aspen Plus." Energy In Press, Corrected Proof.
摘要:The operation and performance of a SOFC (solid oxide fuel cell) stack on biomass syn-gas from a biomass gasification CHP (combined heat and power) plant is investigated. The objective of this work is to develop a model of a biomass-SOFC system capable of predicting performance under diverse operating conditions. The tubular SOFC technology is selected. The SOFC stack model, equilibrium type based on Gibbs free energy minimisation, is developed using Aspen Plus. The model performs heat and mass balances and considers ohmic, activation and concentration losses for the voltage calculation. The model is validated against data available in the literature for operation on natural gas. Operating parameters are varied; parameters such as fuel utilisation factor (Uf), current density (j) and STCR (steam to carbon ratio) have significant influence. The results indicate that there must be a trade-off between voltage, efficiency and power with respect to j and the stack should be operated at low STCR and high Uf. Operation on biomass syn-gas is compared to natural gas operation and as expected performance degrades. The realistic design operating conditions with regard to performance are identified. High efficiencies are predicted making these systems very attractive.

回复 支持 反对

使用道具 举报

发表于 2020-12-16 16:33:30 显示全部楼层
跟模拟电解质一样的啊
回复 支持 反对

使用道具 举报

 楼主| 发表于 2020-12-16 16:33:30 显示全部楼层
55656937 发表于 2020-12-21 10:11
跟模拟电解质一样的啊

电解质要求溶剂一定是水,但是我这个溶剂不是水

点评

对的,所以模拟的时候要加入微量水,这个是模拟技巧。  详情 回复 发表于 2020-12-22 10:18
回复 支持 反对

使用道具 举报

 楼主| 发表于 2020-12-16 16:33:30 显示全部楼层
banknation 发表于 2020-12-21 06:10
你在百度中搜索一下英文资料,有Aspen Plus模拟固体氧化物电池文献,可做为参考。
例如:
Doherty, W., A ...

好的,我去看一下
回复 支持 反对

使用道具 举报

发表于 2020-12-16 16:33:30 显示全部楼层
nuriko 发表于 2020-12-21 13:09
电解质要求溶剂一定是水,但是我这个溶剂不是水

对的,所以模拟的时候要加入微量水,这个是模拟技巧。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2020-12-16 16:33:30 显示全部楼层
55656937 发表于 2020-12-22 10:18
对的,所以模拟的时候要加入微量水,这个是模拟技巧。

好的,我试一下
回复 支持 反对

使用道具 举报

发表于 2020-12-16 16:33:30 显示全部楼层
谢谢楼主分享2
回复 支持 反对

使用道具 举报

不想打字就选择快捷回复吧
您需要登录后才可以回帖 登录 | 注册

本版积分规则

手机版|猛犸论坛【以梦为马,不负韶华】

GMT+8, 2025-4-30 19:37

Powered by 猛犸论坛【以梦为马,不负韶华】

© 2024-2099 Meng.Horse

快速回复 返回顶部 返回列表