脱甲烷塔的错误如何修改

林宝宝 · 发表于 1970-1-1 08:00:00

各位前辈好，我现在在模拟脱甲烷塔。进料温度为-36C，用dstwu模板粗算
但总是出现以下错误不知如何修改好

FLASH RESULTS ARE WITHIN TOLERANCE, BUT MAY BE UNSATISFACTORY BECAUSE
EXTRAPOLATED EOS VAPOR VOLUME ROOT WAS USED FOR PROPERTY CALCULATIONS.
RESUTLS OF BUBBLE POINT FLASHING DISTILLATE LIQUID MIGHT BE UNRELIABLE

请问这是什么意思？由什么引起的应该从何入手
菜鸟刚入门不久，恳请各位前辈赐教了。谢谢