请大家看我的BKP文件

怪兽化工 · 发表于 1970-1-1 08:00:00

诚心感谢各位前辈师哥师姐，这是内容我一开始准备用磷酸氢二胺吸收没反应的NH3，但是呢。。。找不到磷酸二氢氨物性，于是我就改成了电解质，然后出现这个了:
Processing input specifications ...

   INFORMATION
   THERE ARE HENRY COMPONENTS DEFINED IN THIS CASE, THE BINARY DATABANK
   WILL BE SEARCHED AUTOMATICALLY FOR ANY AVAILABLE HENRY CONSTANTS.

   INFORMATION
   PURE COMPONENT PARAMETERS FOR SOME COMPONENTS ARE RETRIEVED FROM
   SDF TABLE.  THESE PARAMETERS ARE USED WITH THE ELECNRTL OPTION SET
   UNLESS YOU ENTER YOUR OWN PARAMETERS IN PROP-DATA PARAGRAPHS

   PARAMETERS RETRIEVED FOR COMPONENT H2O ARE:

      VLBROC  PLXANT

   PARAMETERS RETRIEVED FOR COMPONENT H3N ARE:

      VLBROC

   PARAMETERS RETRIEVED FOR COMPONENT CO2 ARE:

      VLBROC

   PARAMETERS RETRIEVED FOR COMPONENT H3PO4 ARE:

      TC    PC    VC    MW    OMEGA DHFORM  DGFORM  VLBROC
      PLXANT  CPIG

   PARAMETERS RETRIEVED FOR COMPONENT H3PO4 ARE:

      TC    PC    VC    MW    OMEGA DHFORM  DGFORM  VLBROC
      PLXANT  CPIG

  * WARNING IN PHYSICAL PROPERTY SYSTEM
   UNSYMMETRIC ELECTROLYTE NRTL MODEL GMENRTLQ HAS MISSING PARAMETERS:
   Dielectric constant (CPDIEC) MISSING FOR C3H8    & OTHER COMPONENTS.
   CPDIEC OF WATER CALCULATED FROM HELGESON AND KIRKHAM CORRELATION
   (1974) WILL BE ASSUMED.

  Flowsheet Analysis :

COMPUTATION ORDER FOR THE FLOWSHEET:
B1 B3 B4 B5

->Calculations begin ...

   HENRY CONSTANT MODEL HENRY1 HAS MISSING PARAMETERS. PLEASE
   PROVIDE THE MISSING PARAMETERS FOR MAJOR SOLVENTS. THIS ERROR MAY OCCUR
   BECAUSE THE STREAM IS ALL VAPOR, BUT VLE CALCULATION IS REQUESTED.
   TRY SPECIFY VALID-PHASES=VAPOR-ONLY
   HENRY/1ST ELEMENT (DATA SET 1) MISSING FOR SUPERCRITICAL COMPONENT
   HYDRO-01 WITH ALL SOLVENTS:
      WATER    C3H8    ACRYL-01  PROPY-01  ACETO-01  CARBO-02

  ****PROPERTY PARAMETER ERROR
   ERRORS ENCOUNTERED IN CALCULATION OF LIQUID MIXTURE PROPS USING
   OPTION SET PNRTL-IG FOR PHIMX

! Calculations stopped because of missing  property parameters

甄士隐 · 发表于 1970-1-1 08:00:00

看下先哈。

请大家看我的BKP文件

相关帖子

回帖奖励 +2 个韶华币