aspen中flowsheeting Options的Calculator问题

BF886 · 发表于 2017-5-8 18:34:41

Fortran:
   H2O = moist/100
   dry = 1 - H2O
   water = H2O/(mwh + 0.5*mwo)
   ash = dry*ultnal(1)/100
   carbon = dry*ultnal(2)/(100*mwc)
   hydro = dry*ultnal(3)/(100*mwh)
   ntro = dry*ultnal(4)/(100*mwn)
   chlor = dry*ultnal(5)/(100*mwcl)
   sulfr = dry*ultnal(6)/(100*mws)
   OXY = dry*ultnal(7)/(100*mwo)
结果：

SEVERE ERROR
   FORTRAN ERROR AT EXECUTABLE LINE 7
   ATTEMPT TO READ FROM OUTSIDE OF ARRAY: ULTNAL
   ACTUAL ARRAY ELEMENT IS    4
   VALID RANGE IS 1 THROUGH    3.  RESULT SET TO 0

  *** SEVERE ERROR
   FORTRAN ERROR AT EXECUTABLE LINE 8
   ATTEMPT TO READ FROM OUTSIDE OF ARRAY: ULTNAL
   ACTUAL ARRAY ELEMENT IS    5
   VALID RANGE IS 1 THROUGH    3.  RESULT SET TO 0

  *** SEVERE ERROR
   FORTRAN ERROR AT EXECUTABLE LINE 9
   ATTEMPT TO READ FROM OUTSIDE OF ARRAY: ULTNAL
   ACTUAL ARRAY ELEMENT IS    6
   VALID RANGE IS 1 THROUGH    3.  RESULT SET TO 0

  *** SEVERE ERROR
   FORTRAN ERROR AT EXECUTABLE LINE 10
   ATTEMPT TO READ FROM OUTSIDE OF ARRAY: ULTNAL
   ACTUAL ARRAY ELEMENT IS    7
   VALID RANGE IS 1 THROUGH    3.  RESULT SET TO 0

请问为什么我的ash ， carbon ， hydro 能执行，后面的4个就不能执行呢？
如何解决，思路是什么。

BF886 · 发表于 2017-5-8 18:34:41

求解答，给个建议，思路也是极好的。

BF886 · 发表于 2017-5-8 18:34:41

本帖最后由 BF886 于 2017-5-9 11:10 编辑

111111111111111

BF886 · 发表于 2017-5-8 18:34:41

以解决

～小孩er · 发表于 2017-5-8 18:34:41

我现在也遇到了这个问题，请问楼主解决没有，方不方便解答一下。