石油稳态导入动态报错

violet1 · 发表于 1970-1-1 08:00:00

本帖最后由 violet1 于 2022-5-10 10:51 编辑

TRANSLATING BLOCK PREFLASH of TYPE PETROFRAC:
WARNING: Furnace outlet pressure(3.450000000000e+00) is not equal to stage pressure(6.100000000000e+00 for stage 10.  For dynamic simulation, the pressure change between the furnace and stage will be fixed to the steady state value.  If you want the inlet p-drop to vary with flow rate, change your simulation to use a Valve to model the pressure drop.
FATAL ERROR: Pressure drop across furnace should be greater than 0.
Aborting procedure e:\Program Files\ASPEN\Aspen Plus V12.0\GUI\\Ast\PETROFRAC.TBL

TRANSLATING FEED STREAM PF-STEAM of TYPE MATERIAL.

WARNING: Valid phases for this stream has been specified as Vapor-Liquid-FreeWater but it contains pure water.  This may cause a convergence failure in Aspen Dynamics. Please change Valid phases to Vapor-Liquid and change the property method to the free-water property method.

主要是这个致命错误我不知道怎么解决请问有什么大佬，还有这个纯水的问题

文件另外的地址 https://wwd.lanzoul.com/iPprI04ks34f

下载地址

1.bkp

2022-5-10 10:44 大小：407.07 KB 下载次数：3

violet1 · 发表于 1970-1-1 08:00:00

啊，快来人呀超级急

violet1 · 发表于 1970-1-1 08:00:00

TRANSLATING BLOCK PREFLASH of TYPE PETROFRAC:
FATAL ERROR: Pressure drop across furnace should be greater than 0.
Aborting procedure e:\Program Files\ASPEN\Aspen Plus V12.0\GUI\\Ast\PETROFRAC.TBL

violet1 · 发表于 1970-1-1 08:00:00

现在就只剩下这一个错误了