|
|
本人模拟CSTR时，报下面的错误是怎么个情况啊？求达人指点。其中，C，D，E是反应物，G,H是生成物。F没有参与反应。
WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER OMEGA/ELEMENT 1 (DATA SET 1)
LOWER BOUND VIOLATED FOR COMPONENT G
VALUE = -5.8600 , LOWER BOUND = -1.5000
* WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER PLXANT (DATA SET 1) FOR COMPONENT C:
UNREASONABLE VAPOR PRESSURE CALCULATED AT NORMAL BOILING POINT.
VALUE SHOULD BE WITHIN 10% OF 1D5 N/SQM. PLEASE CHECK YOUR INPUT
FOR THE ANTOINE PARAMETERS.
* WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER PLXANT (DATA SET 1) FOR COMPONENT D:
UNREASONABLE VAPOR PRESSURE CALCULATED AT NORMAL BOILING POINT.
VALUE SHOULD BE WITHIN 10% OF 1D5 N/SQM. PLEASE CHECK YOUR INPUT
FOR THE ANTOINE PARAMETERS.
* WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER PLXANT (DATA SET 1) FOR COMPONENT E:
UNREASONABLE VAPOR PRESSURE CALCULATED AT NORMAL BOILING POINT.
VALUE SHOULD BE WITHIN 10% OF 1D5 N/SQM. PLEASE CHECK YOUR INPUT
FOR THE ANTOINE PARAMETERS.
* WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER PLXANT (DATA SET 1) FOR COMPONENT F:
UNREASONABLE VAPOR PRESSURE CALCULATED AT NORMAL BOILING POINT.
VALUE SHOULD BE WITHIN 10% OF 1D5 N/SQM. PLEASE CHECK YOUR INPUT
FOR THE ANTOINE PARAMETERS.
* WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER PLXANT (DATA SET 1) FOR COMPONENT G:
UNREASONABLE VAPOR PRESSURE CALCULATED AT NORMAL BOILING POINT.
VALUE SHOULD BE WITHIN 10% OF 1D5 N/SQM. PLEASE CHECK YOUR INPUT
FOR THE ANTOINE PARAMETERS.
* WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER PLXANT (DATA SET 1) FOR COMPONENT H:
UNREASONABLE VAPOR PRESSURE CALCULATED AT NORMAL BOILING POINT.
VALUE SHOULD BE WITHIN 10% OF 1D5 N/SQM. PLEASE CHECK YOUR INPUT
FOR THE ANTOINE PARAMETERS.
|
|
发表于 1970-1-1 08:00:00
显示全部楼层
IP卡
狗仔卡
提升卡
置顶卡
喧嚣卡
变色卡
千斤顶
显身卡
楼主
