Aspen 运行报错，请各位帮我看看如何解决

fengxinzi133 · 发表于 1970-1-1 08:00:00

Aspen 运行无机反应出现下面提示，不能正常运算了，请大家帮我看看是怎么回事？如何解决呀？

   INFORMATION
   PURE COMPONENT PARAMETERS FOR SOME COMPONENTS ARE RETRIEVED FROM
   SDF TABLE.  THESE PARAMETERS ARE USED WITH THE ELECNRTL OPTION SET
   UNLESS YOU ENTER YOUR OWN PARAMETERS IN PROP-DATA PARAGRAPHS
   PARAMETERS RETRIEVED FOR COMPONENT H2O ARE:
      VLBROC  PLXANT
**  ERROR IN THE "DEF-STREAMS" PARAGRAPH WHICH BEGINS ON LINE 14
   MUST EITHER INCLUDE "NC-COMPS" FOR NC-TYPE SUBSTREAMS,
   OR DROP THE NC-TYPE SUBSTREAM IF THERE ARE NO
   NONCONVENTIONAL COMPONENTS.
**  ERROR IN THE "DEF-STREAMS" PARAGRAPH WHICH BEGINS ON LINE 14
   SUBSTREAM "NC" HAS NO NONCONVENTIONAL COMPONENT.
   IT WILL BE IGNORED.

shbby · 发表于 1970-1-1 08:00:00

应该是你模拟的物料在ASPEN系统中没有基础数据，建议手动输入，可以参考类似的物质自己编一些，也可以查文献查到后输入。
另外ASPEN可以模拟无机物的反应的方法不多，多试几种方法看看

renfangxu · 发表于 1970-1-1 08:00:00

很同意楼上的看法，牛人。。

夜蕈 · 发表于 1970-1-1 08:00:00

ERROR IN THE "DEF-STREAMS" PARAGRAPH WHICH BEGINS ON LINE 17

   MUST EITHER INCLUDE "NC-COMPS" FOR NC-TYPE SUBSTREAMS,
   OR DROP THE NC-TYPE SUBSTREAM IF THERE ARE NO
   NONCONVENTIONAL COMPONENTS.

  **  ERROR IN THE "DEF-STREAMS" PARAGRAPH WHICH BEGINS ON LINE 17

   SUBSTREAM "NC" HAS NO NONCONVENTIONAL COMPONENT.
   IT WILL BE IGNORED.

  **  ERROR WHILE CHECKING INPUT SPECIFICATIONS
   BLOCK NAME: CFUGE MODEL NAME: CFUGE
   PSD ATTRIBUTE TYPE IS NOT PRESENT IN SUBSTREAM CISOLID
   PSD REQUIRED WHEN AVG PARTICLE DIAMETER IS NOT ENTERED.
我模拟的时候也出现了这种问题。。但是不太清楚怎么调解

Aspen 运行报错，请各位帮我看看如何解决

评分

相关帖子

评分