换热器压力超临界，出现错误但醉后右下角显示蓝色的result available，该如何处理

英雄本色 · 发表于 1970-1-1 08:00:00

模拟换热器模块，冷流体压力超临界，于是计算结果出现下列错误
Block: WAP    Model: HEATX  **  ERROR
   DEW POINT CALCULATIONS CANNOT BE PERFORMED BECAUSE THE SPECIFIED PRESSURE
   IS ABOVE THE CRITICAL PRESSURE. FLASH FAILED FOR COLD STREAM DURING DEW
   POINT CALCULATION.    SUBSEQUENT ZONE ANALYSIS AND AREA CALCULATION
   ARE HIGHLY SUSPECT

  **  ERROR
   BUBBLE POINT CALCULATIONS CANNOT BE PERFORMED BECAUSE THE SPECIFIED
   PRESSURE IS ABOVE THE CRITICAL PRESSURE. FLASH FAILED FOR COLD STREAM
   DURING BUBBLE POINT CALCULATION. SUBSEQUENT ZONE ANALYSIS AND AREA
   CALCULATION ARE HIGHLY SUSPECT

但最后右下角却显示出蓝色的结果可用（result available）请教该如何处理，问题出在哪，请指教

飞奔的蜗牛77 · 发表于 1970-1-1 08:00:00

不会，请指教了。

换热器压力超临界，出现错误但醉后右下角显示蓝色的result available，该如何处理

评分

相关帖子