做生物柴油的模拟。模拟完好不容易就剩下一个错误了。但是找不到哪里的错误。麻烦高手

长夜未央

正在用Aspen做生物柴油的模拟。做完之后现在就剩下一个错误了。错误提示信息是： 请高手指点一下，问题处在了哪里。我看别的都给错误的地方。这个怎么都没给错误的地方呢
刚才在别人的机器上模拟了一下。出现的提示是：
<< Loading Simulation Engine 15:17:59 Wed May 11, 2011>>

->Processing input specifications ...
  *   WARNING IN PHYSICAL PROPERTY SYSTEM
      PARAMETER DGFORM/ELEMENT  1 (DATA SET 1)
      UPPER BOUND VIOLATED FOR COMPONENT OIL
      VALUE =  0.17230E+11, UPPER BOUND =  0.50000E+10
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 83
      STREAM NAME: H3PO4
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 87
      STREAM NAME: MEOH
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 92
      STREAM NAME: OIL
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 97
      STREAM NAME: WATER
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  Flowsheet Analysis :
Block $OLVER01 (Method: WEGSTEIN) has been defined to converge
         streams: 19
COMPUTATION ORDER FOR THE FLOWSHEET:
B5 B7 B4
$OLVER01 B8 B6 B9 B10 B11 B30 B28
(RETURN $OLVER01)
B14 B15 B20 B21 B22 B31 B23 B24 B26 B27 B29
->Calculations begin ...
  *** SEVERE ERROR IN PHYSICAL PROPERTY SYSTEM
      IDEAL GAS MODEL HAS MISSING PARAMETERS:
      CPIG/1ST ELEMENT (DATA SET 1) MISSING FOR COMPONENT OIL
  ****PROPERTY PARAMETER ERROR
      ERRORS ENCOUNTERED IN CALCULATION OF IDEAL GAS PROPS FOR
      HIG
      PLEASE FIX THE ERRORS, RE-INITIALIZE, AND RUN AGAIN.
! Calculations stopped because of missing  property parameters

->Processing input specifications ...
  *   WARNING IN PHYSICAL PROPERTY SYSTEM
      PARAMETER DGFORM/ELEMENT  1 (DATA SET 1)
      UPPER BOUND VIOLATED FOR COMPONENT OIL
      VALUE =  0.17230E+11, UPPER BOUND =  0.50000E+10
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 83
      STREAM NAME: H3PO4
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 87
      STREAM NAME: MEOH
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 92
      STREAM NAME: OIL
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  *   WARNING IN THE "STREAM" PARAGRAPH WHICH BEGINS ON LINE 97
      STREAM NAME: WATER
      COMPONENT MOLE FLOWS OF SUBSTREAM: "MIXED"
      ARE NORMALIZED TO THE TOTAL MOLE FLOW VALUE.
  Flowsheet Analysis :
Block $OLVER01 (Method: WEGSTEIN) has been defined to converge
         streams: 19
COMPUTATION ORDER FOR THE FLOWSHEET:
B5 B7 B4
$OLVER01 B8 B6 B9 B10 B11 B30 B28
(RETURN $OLVER01)
B14 B15 B20 B21 B22 B31 B23 B24 B26 B27 B29
->Calculations begin ...
  *** SEVERE ERROR IN PHYSICAL PROPERTY SYSTEM
      IDEAL GAS MODEL HAS MISSING PARAMETERS:
      CPIG/1ST ELEMENT (DATA SET 1) MISSING FOR COMPONENT OIL
  ****PROPERTY PARAMETER ERROR
      ERRORS ENCOUNTERED IN CALCULATION OF IDEAL GAS PROPS FOR
      HIG
      PLEASE FIX THE ERRORS, RE-INITIALIZE, AND RUN AGAIN.
! Calculations stopped because of missing  property parameters


求高手指点一下。谢谢啦~

璇雅

应该是一楼的指出的问题，11.1版本的必须在设定全局信息时设定account，随便写就行。

ectxcqm

你是做哪一部分的模拟?单元很多,不是随便一个单元就可以完成

中南海201188

用户信息没有填写

imeagor

账户问题，楼上各位都告诉你了

zyx-iccas

主要是物性方面的问题，高版本aspen无account的问题。

打一架啊

denghuimin 发表于 2011-5-15 10:32
还有计算结果超出范围

WARNING IN PHYSICAL PROPERTY SYSTEM
      PARAMETER PLXANT (DATA SET 1) FOR COMPONENT NAOH:
      UNREASONABLE VAPOR PRESSURE CALCULATED AT NORMAL BOILING POINT.
      VALUE SHOULD BE WITHIN 10% OF 1D5 N/SQM.  PLEASE CHECK YOUR INPUT
      FOR THE ANTOINE PARAMETERS.

****PROPERTY PARAMETER ERROR
      ERRORS ENCOUNTERED IN CALCULATION OF IDEAL GAS PROPS FOR
      HMXIG,DHMXIG
      PLEASE FIX THE ERRORS, RE-INITIALIZE, AND RUN AGAIN.

! Calculations stopped because of missing  property parameters

这又是什么问题

打一架啊

denghuimin 发表于 2011-5-15 10:32
还有计算结果超出范围

并不是账户问题啊

长夜未央

zyx-iccas 发表于 2013-3-26 18:46

                               
登录/注册后可看大图

主要是物性方面的问题，高版本aspen无account的问题。

&#21681;&#20457;&#22238;&#22797;&#30456;&#24046;&#22909;&#20037;&#39069;&hellip;

645286574

谢谢了，学到了

499806172

也就是有的物性参数没有无法计算

Frank_2013

楼主辛苦了

denghuimin

setup里的account信息没填写。你是11.1版本的吧？06版以后的就不会出这个问题

denghuimin

还有计算结果超出范围

princees

生物柴油这玩意不懂{:1106_365:}

斜月三星

生物柴油组分你是怎么定义的？