IFI 英制紧固件手册第5版1970年 和 第6版1988年。
2021版美标《IFI紧固件标准手册》（第11版）目录大全 《IFI紧固件标准手册》汇编了最常用的英制紧固件和非ISO公制紧固件标准。
新版包含96个由 ASTM、ASME、SAE和IFI发布的独立标准规范，并且还包括自2018年版以来修订的36项标准，以及几项新标准。2021版《IFI紧固件标准手册》是美国工业紧固件协会出版的第11版标准书。此版本展现了自1941 年第一版出版以来，美国紧固件标准和实践持续发展的80年光辉历程。在此期间，该手册发行面覆盖全球主要的制造和建筑行业。《IFI紧固件标准手册》素有紧固件“圣经”的美誉，而2021版《标准手册》继续行使它的使命，为紧固件应用行业及其服务企业提供热忱服务。
2021年版的标题与2018年版一样，不包含“英寸”一词，因为其中包含的许多共识标准已合并为“英寸/公制双标准”。这种合并是紧固件标准委员会、ASTM F16、ASME B18 和SAE 紧固件委员会为撤回多余的ASTM、ASME和SAE公制紧固件标准而采用ISO公制紧固件标准所做的更大努力的一部分。尽管标题中省略了“英制”一词，但这本书从根本上仍然是英制紧固件标准的综合参考来源。
目录 TABLE OF CONTENTS
THREADS
ASME B1.1-2019 Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)
ASME B1.2 1983 (R2017) Gages and Gaging for Unified Inch Screw Threads
ASME B1.3-2007 (R2012) Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M and MJ)
IF1-301 2008 (R2013) Gage Calibration Requirements and Procedures for Thread Gages
BOLTS, STUDS AND THREADED ROD
DIMENSIONS
ASME B18.2.1-2012 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws
ASME B18.5-2012 (R2017) Round Head Bolts
ASME B18.9-2012 (R2017) Plow Bolts
ASME B18.10- 2006 (R2016) Track Bolts and Nuts
ASME B18.31.2-2014 Continuous Thread Stud, Studs for Flange Bolting (Stud Bolt), and Double-End Studs (Inch Series)
ASME B18.31.3-2014 Threaded Rods
ASME B18.31.5-2011 (R2016) Bent Bolts (Inch Series)
IFI -111-2014 Hex Flange Screws
IFI-115-2014 Flange 12-Point Screws
IFI-148-2002 (R2013) Threaded Projection Weld Studs
IFl -199-2014 Tap Bolts (Inch Series)
MATERIAL AND PHYSICAL
SAEJ429-2014 Mechanical and Material Requirements for Externally Threaded Fasteners
ASTMA193/A193M-20 Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A307-14e1 Carbon Steel Externally Threaded Standard Fasteners
ASTM A320/A320M-18 Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service ASTM A354-17e2 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A394-08 (R2015) Steel Transmission Tower Bolts, Zinc Coated and Bare
ASTM A449-14 (R2020) Hex Cap Screw, Bolts and Studs, Steel, Heat Treated,120/105/90 ksi Minimum Tensile Strength, General Use
ASTM A540/A540M-15 Alloy-Steel Bolting for Special Applications
ASTM A962/A962M-19 Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A1082/A1082M-16 High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
ASTM F468-16 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM F593-17 Stainless Steel Bolts, Hex Cap Screws, and Studs
ASTM F901-20 Aluminum Transmission Tower Bolts and Nuts
ASTM F1554-18 Anchor Bolts, Steel, 36, 55 and 105-ksi Yield Strength
SOCKETS
DIMENSIONS
ASME B18.3-2012 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)
MATERIAL AND PHYSICAL
ASTM A574-17 Alloy Steel Socket-Head Cap Screws
ASTM F835-20 Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F837-20 Stainless Steel Socket Head Cap Screws
ASTM F879-15 (R2020) Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F880-12 (R2017) Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
ASTM F912-11(R2017) Alloy Steel Socket Set Screws
STRUCTURAL FASTENERS
DIMENSIONS
ASME B18.2.6-2019 Fasteners for Use in Structural Applications
MATERIAL AND PHYSICAL
ASTM F959/F959M-17a Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
ASTM F3125-19e2 High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
ASTM F3148-17a High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
NUTS
DIMENSIONS
ASME B18.2.2-2015 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)
ASME B18.6.9-2010 (R2017) Wing Nuts (Inch Series)
ASME B18.16.4-2008 (R2013) Serrated Hex Flange Locknuts: 90,000 psi
ASME B18.16.6-2017 Prevailing Torque Locknuts
MATERIAL AND PHYSICAL
SAE J995-2017 Mechanical and Material Requirements for Steel Nuts
ASTM A194/A194M-20a Carbon Steel, Alloy Steel and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A563-15 Carbon and Alloy Steel Nuts
ASTM F467-13 (R2018) Nonferrous Nuts for General Use
ASTM F594-09 (R2020) Stainless Steel Nuts
IFI-101 2002 (R2013) Torque-Tension Requirements for Prevailing-Torque Type Steel Hex and Hex Flange Nuts
IFI-155 2005 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts
IFI-160-2007 (R2013) Test Procedure for the Performance of Nuts with Pre-Applied Adhesive Coated Threads
SCREWS
ASME B18.6.1-1981 (R2016) Wood Screws
ASME B18.6.2-1998 (R2010) Slotted Head Cap Screws
ASME B18.6.3-2013 Machine Screws, Tapping Screws, and Metallic Drive Screws
ASME B18.6.8-2010 (R2017) Thumb Screws and Wing Screws
ASME B18.13-2017 Screw and Washer Assemblies –SEMS
IFl-113-2015 Steel Self-Drilling Tapping Screws
ASTM C954-18 Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
ASTM C1002-18 Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
ASTM C1513-18 Steel Tapping Screws for Cold-Formed Steel Framing Connections
WASHERS
ASME B18.21.1-2009 (R2016) Washers: Helical Spring-Lock, Tooth Lock and Plain Washers (Inch Series)
ASTM F436/F436M-19 Hardened Steel Washers Inch and Metric Dimensions
ASTM F2437/F2437M-17 Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
RIVETS
ASME B18.1.1-1972 (R2016) Small Solid Rivets 7/16 In. Nominal Diameter and Smaller
ASME B18.1.2-1972 (R2016) Large Rivets 1/2 In. Nominal Diameter and Larger
ASME B18.7-2007 (R2017) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps
IFI-110-2003 (R2013) Glossary of Terms Relating to Blind Rivets
IFI-114-2015 Break Mandrel Blind Rivets
IFl-116-2015 Multi-Grip Break Mandrel Blind Rivets
IFl-117-2003 (R2013) Pull Through Mandrel Blind Rivets
IFl-119-2003 (R2013) Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI-123-2003 (R2013) Drive Pin Blind Rivets
lFI-126-2003 (R2013) Break Mandrel Closed End Blind Rivets
IFl-130-2003 (R2013) Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
IFI-134-2015 Multi-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFl-135-2013 Mechanical Testing of Blind Rivets
IFI-137-2003 (R2013) Inspection and Quality Assurance for General Purpose Blind Rivets
PINS
ASME B18.8.1-2014 Clevis Pins and Cotter Pins
ASME B18.8.2-2000 (R2010) Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins
FINISHES
ASTM B695-04 (R2016) Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM F1941/F1941M-16 Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
ASTM F2329/F2329M-15 Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM F3393-20e1 Zinc-Flake Coating Systems for Fasteners
QUALITY
ASME B18.2.9-2010 (R2017) Straightness Gage and Gaging for Bolts and Screws
ASME B18.18-2017 Quality Assurance for Fasteners
ASTM A370-20 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM F606/F606M-19 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F788-20 Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
ASTM F812-12 (R2017) Surface Discontinuities of Nuts, Inch and Metric Series
ASTM F1470-19 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F2282-18 Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F2328-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
IF1-124-2002 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws
IFI-125-2007 (R2013) Test Procedure for the Performance of Adhesive Coated Prevailing-Torque Screws
IFI-143-2002 (R2013) Test for Evaluating the Torque-Tension Relationship on Both Externally and Internally Threaded Fasteners
美国最新紧固件标准 IFI (ANSI, ASME, SAE)第七版部分中文目录
A部分 螺纹
IFI 螺纹设计的基本要素
ANSI/ASME B1.7M1 螺纹的专业术语、定义和字母标记
ANSI/ASME B1.1 统一英寸制螺纹(UN和UNR螺纹形状)
ANSI/ASME B1.3 适用于尺寸合格性的螺纹测量方法
ANSI/ASME B1.2 统一英寸制螺纹的量规和测量
ANSI/ASME B1.12 5级过盈配合螺纹
B部分 材料
IFI 选择紧固件材料
IFI 螺栓和螺母的相适应性
IFI 腐蚀
IFI 镀层和涂层
SAE J429 外螺纹紧固件的机械性能和材料要求
ASTM A307 碳钢外螺纹标准紧固件
ASTM A449 淬火和回火的钢螺栓和螺柱
ASTM A354 淬火和回火的合金钢螺栓、螺柱和外螺纹紧固件
ASTM A193/A193M 高温下使用的合金钢和不锈钢栓接材料
ASTM A320/A320M 低温下使用的合金钢和不锈钢栓接材料
ASTM F593 不锈钢螺栓、六角头螺钉和螺柱
ASTM F468 一般应用的有色金属螺栓、六角头螺钉和螺柱
ASTM A563 碳钢和合金钢螺母
ASTM A194/A194M 与高压高温下使用的螺栓配用的碳钢和合金钢螺母
ASTM F694 不锈钢螺母
ASTM F467 一般应用的有色金属螺母
ASTM F788 螺栓、螺钉和螺柱的表面缺陷
ASTM F812 螺母的表面缺陷
ASTM F606 测定外螺纹、内螺纹紧固件、垫圈和铆钉的机械性能的试验方法
ASTM B633 钢铁制品上电解沉积锌涂层
ASTM A153 钢铁制品上的锌涂层（热镀锌）
ASTM B695 钢铁产品上的机械沉积锌涂层
ASTM B696 钢铁产品上的机械沉积镉镀层
ASTM A165 钢产品上的电解沉积镉涂层
C部分 螺栓、螺钉和螺柱
ANSI/ASME B18.2.1 方头、六角头螺栓和螺钉
IFI 大规格重型六角头螺钉
IFI-111 六角头法兰面螺钉
IFI-115 12角头法兰面螺钉
ANSI/ASME B18.5 半圆头螺栓
ANSI/ASME B18.9 皿头螺栓
ANSI/ASME B18.10 导轨螺栓
ANSI/ASME B18.15 锻造吊环螺栓
ANSI/ASME B18.6.2 头部开槽螺钉
IFI 凸点焊接螺柱
IFI-136 螺柱和弯曲螺栓
D部分 螺母
ANSI/ASME B18.2.2 方螺母和六角螺母
IFI 六角法兰面螺母和六角大法兰面螺母
IFI-128 六角轴接螺母
ANSI/ASME B18.10 导轨螺栓用螺母
ANSI/ASME B18.6.3 方机螺钉螺母和六角机螺钉螺母
ANSI/ASME B18.17 蝶形螺母
E部分 高强度结构栓接
IFI 关于高强度结构栓接的说明
ASTM A325 结构钢联结件用的高强度螺栓
ASTM A490 热处理的钢结构螺栓,最小抗拉强度150ksi
ASTM A394 钢制镀锌输电塔螺栓
ASTM F901 铝制输电塔螺栓和螺母
ANSI/ASME B18.2.1 重型六角结构螺栓和斜头螺栓
IFI 装配螺栓
G部分 内凹槽螺钉
ANSI/ASME B18.3 内凹槽螺钉、轴肩螺钉和紧定螺钉
ASTM A574 合金钢内凹槽圆柱头螺钉
ASTM F835 合金钢内凹槽按钮头和沉头螺钉
ASTM F912 合金钢内凹槽紧定螺钉
ASTM F879 不锈钢内凹槽按钮头和沉头螺钉
ASTM F880 不锈钢内凹槽紧定螺钉
M部分 工艺和技术资料
ANSI/ASME B18.12 机械紧固件的术语汇编
IFI 标准技术规范ASTM，ASME，SAE，IFI，US政府
IFI 质量保证
ANSI/ASME B18.8.1M 一般用途紧固件的检查和质量保证
ANSI/ASME B18.8.2M 大批量机器装配紧固件的检查和质量保证
IFI 螺栓连接设计介绍
IFI 紧固件识别标志
IFI 特殊成形设计
|
IP卡
狗仔卡
楼主
提升卡
置顶卡
喧嚣卡
变色卡
千斤顶
显身卡
发表于